GLOCK STAINLESS STEEL CHANNEL LINER & ALUMINUM 6061 TOOL

BUYING 1 PC ONLY

The main benefit when using our stainless channel liner is the increase of firing pin speed. The firing pin will hit primers harder when increasing firing pin speed, which will help to eliminate light primer strikes, which is the main goal and reason for using our stainless steel liner. The increase of F.P. speed is also a benefit when using lighter F.P. springs.

​

Our S.S. liner will allow the firing pin to travel with greater speed by reducing friction between the inner liner wall, firing pin spring and spring cups.

​

Our S.S. liner will stay smooth with use, unlike some plastic liners.

​

Our S.S. liner will increase F.P. speed 25% to 30%.

​

Trigger pull weight is reduced 1 to 4 ounces.

Easy installation

The glock slide firing pin channel has a part installed in it which is called a channel liner, it is a tubular shaped plastic liner. It's duty is to lessen wear on the firing pin spring and spring cups. When it needs to be replaced from wear, damage or when slide is refinished our tool will easily remove and replace the channel liner.

​

For removal simply screw threaded end into liner, place an oem armorer's tool or similar tool through the hole in the liner tool and simply pull liner out.

​

For installation simply place the new liner on the unthreaded end of the tool (unbeveled end of liner goes on the tool first), then simply push new liner into slide channel until it seats at breech end of channel.

​

Our channel liner tool is made from premium grade ALUMINUM 6061

Features:

• 17-4 Stainless Steel CHANNEL LINER

Compatibility:

• All Glock EXCEPT 42 OR 43